Highlights

Manual Power Distribution: Manual EV charging switch delivers AC 240V power up to 24A with hands-operated switching, no auto guesswork. You can achieve Level 2 EV charging without rewiring. Before charging, set the charging current below 24A

Compatible with Common Outlets: Our manual splitter switch features 1 NEMA 10-30P plug and 2 NEMA 10-30R outlets. No outlet replacement or circuit remodeling is needed. It reduces adapter use, helping lower the risk of overload and poor contact

Real-Time Status Display: With an LCD screen and indicator lights, this splitvolt splitter switch displays real-time readings of voltage, current, and charging status. It allows users to quickly check device operation, easy to monitor from a distance

Tested to ETL Standard: Featuring triple protection, including a 32A circuit breaker, flame-retardant housing, and matched cable configuration, the dryer EV charger splitter reduces the risk of overcurrent and overload for reliable circuit operation

Easy Operation & Setup: With the power off, connect the 240V dryer splitter for EV first. Next, plug the device to be charged. Finally, turn on the power and toggle the splitter switch to select the circuit

Specification

Brand:VEVOR

Details

Dual Outlets

The manual EV charging switch supports two devices operating at the same time, reducing the need for frequent plugging and unplugging. It is compatible with AC 240V and supports up to 24A.

 

Compared with a 100V power supply, a 240V power source delivers higher output power and faster charging speeds. This manual splitter switch helps you reduce your waiting time.

 

Designed with extreme conditions, the splitvolt splitter switch operates within a temperature range of -13°F to 122°F. Suitable for both indoor and outdoor use.

 

This dryer EV charger splitter is compatible with most 240V household appliances and EV charging equipment, including EV chargers, dryers, washing machines, microwaves, dishwashers, ovens, and garbage disposals.

 

This 240V dryer splitter for EV uses your existing 240V outlet to share a 240V circuit between your dryer and electric vehicle charger. No electrician or rewiring is required.